Omnimount - 30.0 CA

Below are all the different types of Omnimount. Select the device of your choice, to download the manual

Contents

FINAL STAGES OF TIGHTENING AND POSITIONING 6 1 Check that the final rotational position for the ball shaft is correct Place the appropriate size wrench on the shoulder nut With equal pressure push against the ball shaft in the opposite direction as you lighten the nut This will minimize the stress on Doth trie mounting plate and the ceiling NOTE If you try to move the ball shaft without first loosening it where it joins the mounting plate lateral forces will transmit to the mounting plate fasteners The resulting stress transferred to the mounting surface could weaken the installation 6 2 If you need to readjust the lateral position of the ball shaft always loosen the shoulder nut first Remember tighter does not mean better Over tightening faste ...